U17 | Yuchai U17 Mini Excavator | Y17
Mini Excavator

Yuchai

$32,000.00

Operating Weight

1.9 Ton (3,792 lbs / 1,720 kg)

Platform

Owner-operator - Premium diesel engine

Engine

24.8 HP (18.5 kW) @ 3,600 rpm

How to locate engine info

Hydraulics

Pump TypeUnknown
Operating Pressure3,481 PSI
Flow Rate17.0 GPM

Features

  • AUX1 pressure / flow: 21 MPa / 18-40 L/min
  • AUX2 pressure / flow: 21 MPa / 36 L/min
  • Pilot control lever control
  • Regular joysticks standard
  • Proportional joysticks optional
  • Hydraulic quick coupler adapter
  • Load-sensing hydraulic system
  • Hydraulic quick coupler lines optional
  • Hydraulic quick coupler optional
  • Hydraulic hammer optional
  • Arm cylinder protection plate optional
  • Bucket cylinder protection plate optional
  • Boom holding valve optional
  • Arm holding valve optional
  • Single electric proportional control joystick optional

Digging Capabilities

Boom TypeSwing boom
Swing Angle60° left / 55° right
Tail Swingzero-swing
Slew Rotation360°
Operator ControlsPilot
Bucket Width17.7"
Bucket Capacity1.77 ft³
Max Depth90.9"
Max Radius154.7"
Digging Force3,866 lbf

Fluid Capacities

Fuel Tank16L
Hydraulic Oil16L

Rated Grade Ability

30°

Do not exceed this angle to avoid tipping the machine. Always assess ground conditions before operating on slopes.

Track Size

230x90x38

Width (mm) x Pitch (mm) x Links (#)

Specifications

Boom Type

Swing boom

Swing angle: 60° left / 55° right

Cab Type

Canopy

Undercarriage

Expandable

Tail Swing

zero swing

Controls

Pilot

Pump Type

Unknown

Features

Engine: Kubota D902
Engine power: 11.8 kW / 2300 rpm
Emission standard: Euro V / EPA Tier 4F / CN IV
Max digging force of arm: 9.5 kN
Traveling speed: 2 / 4 km/h
Max hauling force: 22 kN
Slewing speed of platform: 8.5-10.5 rpm
Max digging height: 3600 mm
Max dumping height: 2485 mm
Max digging radius on ground level: 3870 mm
Max vertical digging depth: 1920 mm
Min slewing radius: 1500 mm
Overall dimensions: 3930 x 990 x 2340 mm
Undercarriage width: 990 / 1240 mm
Length of track: 1600 mm
Minimum ground clearance: 150 mm
Platform floor height from ground: 450 mm
Platform tail turning radius: 620 mm
Length to center of rollers: 1230 mm
Track gauge: 760 / 1010 mm
AUX1 pressure / flow: 21 MPa / 18-40 L/min
AUX2 pressure / flow: 21 MPa / 36 L/min
Arm length: 950 mm
Boom length: 1828 mm
High-reliability cast steel trench head structure
Detachable canopy
TOPS canopy
Pilot control lever control
Regular joysticks standard
Proportional joysticks optional
ISO/SAE mode switching available
LCD instrument
Wide and comfortable foot space
Centralized maintenance points
Hydraulic quick coupler adapter
2 LED work lights at the front
1 rear LED work light
1 boom work light
AUX1 standard
Load-sensing hydraulic system
Quick connector for AUX pipes optional
Tilt rotator optional
Mechanical quick coupler optional
Hydraulic quick coupler lines optional
Hydraulic quick coupler optional
250 mm bucket optional
450 mm bucket standard
1,000 mm ditch-cleaning bucket optional
950 mm arm standard
Hydraulic hammer optional
Auger optional
Dozer blade standard
Arm cylinder protection plate optional
Bucket cylinder protection plate optional
Boom holding valve optional
Arm holding valve optional
230 mm rubber tracks standard
230 mm steel tracks optional
Telescopic chassis standard
Single electric proportional control joystick optional
Beacon on canopy standard
Extra counterweight optional

Platform Information

CNE-15T-DPOwner-operator1.3t - 2tPremium diesel engine

Owner-Operator (Light) (1.3–<2.0 t). Gear pumps remain the most common pump type, but this is the class where piston and variable piston pumps begin to appear on higher-end models. Pilot controls are becoming the norm, though side-stick holdovers still exist. Open ROPS is typical with enclosed cabs available and increasingly common on premium diesel variants. Swing booms are more prevalent than in lighter classes. Clone diesel engines (e.g., KOOP/Changchai) are common. Meaningful step up in hydraulic pressure/flow and drivetrain robustness over 10T. Used by owner-operators and small excavation businesses for daily light-commercial work. Maintenance focuses on diesel fuel systems, pilot hydraulics, pumps/valves, and final drives.

Known Platform Aliases (7 confirmed)

AGT QNT20AGT NT18KAGT NT18CAEL EX15KBCAEL EX15KB-CMechMaxx MEC12XCMG XE18U

Manufacturer

Guangxi Yuchai Heavy Industry Co., Ltd.

Yulin City, Guangxi, China

First Chinese mini excavator manufacturer (1989)