Engine Oil Change - AGT MY50R
Regular engine oil and filter replacement to maintain engine health and longevity.
Model Notes
Oil capacity: 4.5L. Use 15W-40 for temperatures above 0°C, 10W-30 for colder conditions.
Warm up the Yanmar engine for 5 minutes.
Locate the drain plug on the left side of the engine block.
Use a 17mm socket to remove the drain plug.
The oil filter is a spin-on type located at the front of the engine.
Use a 76mm filter wrench to remove the old filter.
Apply a thin coat of oil to the new filter gasket before installing.
Reinstall drain plug with new crush washer (M14).
Add 4.5 liters of 15W-40 diesel engine oil.
Check oil level on dipstick - should be at upper mark.
No videos added for AGT MY50R.
Add helpful YouTube tutorials specific to this model.
Engine Oil
Diesel engine oil for lubrication
No specific parts listed yet
Oil Filter
Spin-on or cartridge oil filter element for engine oil filtration
No specific parts listed yet
Drain Plug Washer
Copper or aluminum crush washer for oil drain plug
No specific parts listed yet