TracksMedium
Rubber Track Replacement
Remove and install new rubber tracks when worn or damaged.
Estimated: 2-3 hours
1 model-specific guide
Model-Specific Guides
General Guide
Track Removal and Installation
Worn or damaged tracks reduce traction and can damage undercarriage components. Replace when tread is worn or cracks appear.
Tools Required:
Heavy-duty jack or liftJack standsPry barGrease gunWrench set
Safety Notes
- • Use proper blocking - machine is heavy
- • Keep hands clear of track and sprocket when rotating
General Steps:
1
Position machine on firm, level surface.
2
Release all track tension using relief valve.
3
Block up one side of machine to lift track off ground.
4
Rotate track to access point and work off drive sprocket.
5
Pull track off over the idler and rollers.
6
Inspect sprocket, idler, and rollers for wear.
7
Position new track over idler and work onto drive sprocket.
8
Tension track to proper specification.
9
Lower machine and test drive forward and reverse.
Video Resources
No videos added yet.
Add helpful YouTube tutorials for this repair job.